|
Questions & Answers
All straps are cut from 100% top grade leather. The straps are made in house, Literally meaning in my house. No machines are used in making these straps that I create. All the work is done with my own two hands. From cutting the leather to the stitching.
Basic strap knowledge
There is some basic information that is needed when placing an order for a strap. First all strap measurements are taken using the metric system. The strap is measured at the watch lugs and at the buckle end.
24/24
This means the strap is a PreV strap and the band measures 24mm at the watch case lugs and 24mm at the buckle end.
Then you need to know the measurements of the short side of the strap. This is the side that the buckle is attached to. Most vary from 75mm to 85mm depending on your wrist size.
Then comes the long side of the strap. A OEM Panerai strap measures 115mm on the long side. Depending on your wrist size you can make the long side longer or shorter giving you a custom fit.
The final measurements will read as follows:
115/75mm 24/24mm Thickness 5mm
If you need further help this provides an image.
|